EN
75
This microwave oven uses modern
electronic control to set cooking
parameters to better meet your
cooking needs.
1. CLOCK SETTING
When the microwave oven is on,
the LED screen will display “0:00”
and the buzzer will ring once.
1. Press “Timer/Clock” twice and
the hour figures will flash.
2. Turn “ ” to set the time; the
time entered should be within 0-23.
3. Press “Timer/Clock” and
the minute figures will flash.
4. Turn to “ ” to set the
minutes; the time entered should
be within 0-59.
5. Press “Timer/Clock” to finish
setting the clock. “:”. will flash.
Please note:
1) If the clock is not set, it will not
work when connected.
2) During the clock setting
process, if you press
“Stop/Clear”, the microwave will
return to the previous status
automatically.
2. MICROWAVE COOKING
Press “Microwave” and the LED
screen will show “P100”. Press
“Microwave” four times or turn “ ”
to select the desired power; each
time you press you will see
“P100”, “P80”, “P50”, “P30” or
“P10”. Then press “Start/+30s/
Confirm” to confirm, and turn
“ ” to set the cooking time from
0:05-95:00. Press “Start/+30s/
Confirm” again to start cooking.
Example: If you want to use
80% of the power to cook for
20 minutes, you can follow
these steps:
1. Press “Microwave” once and the
screen will display “P100”.
OPERATING
INSTRUCTIONS
To Next Page
Loading...