38
Using BIOS
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
-=- System Hardware Monitor-=-
Smart Fan Function Press Enter
Shutdown Temperature Disabled
Warning Temperature Disabled
CPU Temperature : 50°C/122°F
System Temperature : 34°C/93°F
CPU FAN Speed : 2616 RPM
SYS FAN Speed : 0
CPU Vcore : 1.360V
VDIMM : 1.824V
Help Item
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
PC Health Status
f
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Default settings
F1:General Help
: Move
mnlk
SMART FAN Control (Enabled)
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART FAN Control Enabled
SMART Fan start PWM value 40
SMART Fan start TEMP.(°C) 50
DeltaT1 +3
SMART Fan Slope PWM value 4 PWM value/°C
Smart Fan Function
f
Scroll to this item and press <Enter> to view the following screen:
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Default settings
F1:General Help
: Move
mnlk
Options
SMART Fan start PWM value (40)
SMART Fan start TEMP. (°C) (50)
This item is used to set the start PWM value of the smart fan.
This item is used to set the start temperature of the smart fan.
This item allows you to enable/disable the control of the system fan speed by chang-
ing the fan voltage.
To Next Page
Loading...
Need help?
General
