To Next Page

To Previous Page

Setting Up eJIFFY

4. Restart your computer after eJIFFY installation. Press <DEL> or click the BIOS

Setup button on the post screen to enter the BIOS setup page after boot up.

5. And then enter the Advanced Setup page to enable the item ECS eJIFFY Func-

tion. Press F10 to save the configuration and exit. Restart your computer.

2. Please refer to ECS website for new eJIFFY application updates.

1. eJIFFY is available in SATA/IDE/AHCI mode. It does not support RAID

configuration and the onboard 34-pin floppy drives.

Note:

Other manuals for ECS A780GM-A

Questions and Answers:

Need help?

Do you have a question about the ECS A780GM-A and is the answer not in the manual?

General

Internal memory	32 GB
Number of memory slots	4
Processor socket	Socket AM2
Processor manufacturer	AMD
Compatible processor series	AMD Sempron
USB 2.0 connectors	3
S/PDIF out connector	Yes
Number of COM connectors	1
Number of SATA connectors	5
USB 2.0 ports quantity	6
Firewire (IEEE 1394) ports	0
Motherboard chipset	AMD 780G
Motherboard form factor	ATX
BIOS type	AMI
PCI Express x1 slots	2
Maximum graphics card memory	1920 MB
Controller interface type	AMD SB700
RAID levels	0, 1