30
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the
Windows Date and Time Properties utility.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
IDE Master
SATA
LBA/Large Mode
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T Auto
32Bit Data Transfer Enabled
Help Item
Select the type
of device connected
to the system.
Device : Not Detected
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
Auto
IDE Master/Slave, SATA1~6
f
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports six SA
TA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture’s website for updated
manual.
Date Wed 08/19/2009
f
IDE Master Not Detected
IDE Slave Not Detected
SATA 1 Hard Disk
SATA 2 Not Detected
SATA 3 Not Detected
SATA 4 Not Detected
SATA 5 Not Detected
SATA 6 Not Detected
IDE BusMaster Enabled
Help Item
f
f
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
Time
21 : 52 : 56
Use [Enter], [TAB] or
[SHIFT
-TAB] to select
a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
f
f
f
f
f
To Next Page
Loading...
Need help?
General
Weight and Dimensions
