ECS A790GXM-A

62
ATI CrossFireX
TM
Technology & Hybrid Graphics
®
Technology Support
Note:
4. Enter Catalyst Control Center, you can see the option of CrossFire
TM
, click it
and select Enable CrossFire
TM
, then Hybrid Graphics
®
starts.
You can only use either the CrossFireX™ technology or the Hybrid
Graphics
®
technology since AMD does not support the case for
Hybrid Graphics
®
technology by using CrossFireX™ technology
and Onboard VGA.
1. If you want to change UMA to UMA+SP or UMA+SP to UMA
when using Hybrid Graphics
®
, please make sure to cancel Enable
CrossFire
TM
in Catalyst Control Center firstly, then restart the com-
puter and enter the BIOS setup to make the change, finally, enter
the OS and select Enable CrossFire
TM
in Catalyst Control Center.
Warning:
2. To disable Hybrid Graphics
®
, please make sure to cancel Enable
CrossFire
TM
in Catalyst Control Center firstly.