29
ECTIVE DC Series
Integrated Alarm
Unusual voltage fluctuations can cause an
alarm tone to sound every 3-5 minutes.
On the display, the message “Maintain!
will flash.
In the event of an alarm, the unusual
voltage deviation is shown on the display.
If you do not respond to the alarm within
30 minutes, the sound is automatically
deactivated. Approximately 4 hours later,
the alarm will sound again. This is repeated
three times before the alarm stops
completely. The message on the display will
continue to flash.
Press the button next to the LCD display to
manually turn off the alarm. Pressing the
button twice will clear the recorded voltage
deviations.
To Next Page
Loading...