Directory
------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
--------
02
Directory
A. Product overview
Disclaier-------------------------------------------------------------------------------------
Safety Instructions------------------------------------------------------------------------
Structural Schematic--------------------------------------------------------------------
Specication-------------------------------------------------------------------------------
Packing List--------------------------------------------------------------------------------
B. Equipment Set
UnI
-------------------------------------------------------------------------------------------
Unboxing
----------------------------------------------------------------------------------
Initial Start-Up
---------------------------------------------------------------------------
Menu Feature-----------------------------------------------------------------------------
FDM
single 3D print
--------------------------------------------------------------------
FDM-Dual
3D print
----------------------------------------------------------------------
Laser Engraving--------------------------------------------------------------------------
CNC Carving-------------------------------------------------------------------------------
C. EcubWare slice Settings
Setup EcubWare-------------------------------------------------------------------------
FDM Setting
FDM 3D Print
------------------------------------------------------------------------------
FDM_Multi-Color 3D print
------------------------------------------------------------------
FDM_Multi-Material 3D print
----------------------------------------------------------------
LASER Setting----------------------------------------------------------------------------
CNC
Setting-------------------------------------------------------------------------------
Other Function
--------------------------------------------------------------------------
D. Equipment Maintenance
Maintenance and cleaning of guide rail
-----------------------------------------------------
Maintenance of printing platform
------------------------------------------------------------
CNC plate
----------------------------------------------------------------------------------
Laser Toolhead life
-------------------------------------------------------------------------
CNC Toolhead life
--------------------------------------------------------------------------
E.
Common Faults
Unable to start-up
--------------------------------------------------------------------------
Screen ower screen white screen,no display
-----------------------------------------------
Temperature display alarm
------------------------------------------------------------------
SD Card contents can not be read
----------------------------------------------------------
The menu switch Toolhead function can not be activated
------------------------------------
Can not return to zero(X,Y,inpact cannot return to zero,Z cannot return to zero)
--------------
Automatic reboot
---------------------------------------------------------------------------
Z-oset setting is not successful. The rst layer is so close or so far to the platform
----------
The Toolhead can not be reset after changing
-----------------------------------------------
FDM failed to feed/unscrew, plug
-----------------------------------------------------------
FDM print rst layer non-stick base plate
----------------------------------------------------
Laser engraving in the printing process points of light is very large, did not carve out the
pattern
-------------------------------------------------------------------------------------
CNC engraving and milling in the printing process, part of the processing pattern, another
part of the processing pattern
---------------------------------------------------------------
Welcome to contact us!
04
05-09
10
11
12-13
15
16
17
18
19-22
23-26
27-30
31-33
35-37
38-39
40-42
43-44
45-46
47-48
49-59
61
61
61
61
61
63
63
63
63
63
63
63
63
64
64
64
64
64
To Next Page
