Edco CPM-4 - Maintenance Schedule

CPL8-CPM-4-8-10-I-0416
Page 19
800-638-3326 • edcoinc.com • sales@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC.
Repairs are to be done
by authorized EDCO
Dealers only.
Read and follow instruc-
tions in the engine owner’s
manual.
Maintenance Schedule
* Gasoline and propane models only.
X
Before Operation
As Required
Every 40-50 Hours
of Operation
Every 4 Hours
Daily
X
X
X
All maintenance to
be performed by
qualied
personnel.
Every Cutter
Change
Visual Inspection of
Entire Machine
Check Engine Oil*
Cutter Shaft Wear
(bushings, drum)
Check Cutters for
uneven wear
X
X
X
X
X
X
X
X
Grease Cutter
Assembly Bearings
Clean Air Filter Element*
Clean Dust & Dirt
Off Machine
Check Cutter Shaft
and Bushings
Change Engine Oil*
(Refer to engine manual)
Grease Wheel Bearings
Belt Tensioning
X
New