Edco SEC-NG - Maintenance Schedule; Routine Maintenance Tasks

Page 15
SECNG -I-1217
E-SPTS-I-0809
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC.
Quick Reference for
Maintaining Grinders
Before
Operation
Every 4
Hours
Daily
Every 50
Hours of
Operation
As
Required
Visual Inspection of
Entire Machine
X
Check Engine Oil*
X
Check Engine Oil*
(refer to Engine manual)
X
Clean Air Filter
Element*
X
Grease Bearings
X
Inspect Drive Belts
X
Inspect Grinding Discs
X
Clean Air Filter
Element*
X
Belt Tensioning
X
Clean Dust & Dirt off
Machines
X
MAINTENANCE SCHEDULE
* Gasoline and Propane only
Repairs are to be performed by approved EDCO repail technicians.
Read and follow all instructions in the Engine Manufacturer’s Owners Manual.