Why is my Eden Aquariums feeder difficult to rotate?
If your Eden Aquariums feeder is rotating outwards with difficulty, it may be due to a dirty central pivot or exhausted batteries. To resolve this, dry clean the central pivot to ensure it rotates without friction, and replace the batteries.
What to do if the display on my Eden Aquariums doesn't switch on?
If the display on your Eden Aquariums does not switch on, the issue might be due to a lack of power supply. Check that the batteries are properly inserted, or verify the correct voltage and polarity of the adapter.
What to do if food container is blocking while closing in Eden Aquariums?
If the food container is blocking while closing in your Eden Aquariums, it could be due to an accidental block during operation. Try removing the food container, performing a manual reset, and then remounting the food container.
Attaching adhesive feet to the base and inserting batteries into the compartment.
Instructions for removing, filling, and closing the food container.
Guidance on positioning the feeder near the open edge of the aquarium.
Instructions for using the optional bracket for securing the feeder to the tank frame.
Steps to set the current time on the feeder's display.
Guide to setting daily feeding schedules and ration quantities.
Overview of manual feeding, feed counters, and display mode switching.
Lists common malfunctions, their possible causes, and remedies.
Details the 36-month guarantee on materials and manufacturing faults.
Instructions for proper disposal of the product in accordance with regulations.
To Next Page
General