Do you have a question about the Eden WT-400 and is the answer not in the manual?
Type | Bass Amplifier Head |
---|---|
Enhance Control | Yes |
Effects Loop | Yes |
Power Output | 400W @ 4 Ohms |
DI Output | Balanced XLR |
Inputs | 1/4" Instrument Input |
Outputs | DI out |
Dimensions | 30.5 cm x 8.9 cm x 30.5 cm |
Speaker Configuration | Head only, no speakers |
Hearing protection warning regarding high volume levels and potential permanent hearing loss.
Controls for signal input, preamplification gain, and compression.
Controls for shaping the tonal characteristics of the amplifier's sound.
Power input, fuse access, speaker output, and auxiliary inputs.
Steps for adjusting Bass, Treble, and Quasi-Parametric EQ controls for desired tone.