Edenwood ED50E00UHD-VE

Questions and Answers

K
kmayerAug 5, 2025
What to do if my Edenwood LED TV has no sound?
- P
  Perry HawkinsAug 5, 2025
  If your Edenwood LED TV has no sound, first verify that the TV is not muted by pressing the Mute button or increasing the volume. If the sound is only coming from one speaker, check the balance settings in the Sound menu. Also, ensure that the Sound Output option is correctly configured within the Sound menu. If you are using HDMI, changing the HDMI source input setting to Enhanced or Regular from the Source Settings option in the Sources menu or the Sources option in the Settings>System menu might help.
K
Kaitlin SmithAug 10, 2025
How to fix 'no signal' on my Edenwood LED TV?
- H
  Harry MartinezAug 10, 2025
  If your Edenwood LED TV is not receiving any signal, ensure that you have selected the correct source. Check that the antenna is properly connected and that the antenna cable isn't damaged. Verify that you are using suitable plugs to connect the antenna. If you're using an HDMI input, try changing the related HDMI source input setting to Enhanced or Regular from the Source Settings option in the Sources menu or the Sources option in the Settings>System menu.
T
Timothy WilkinsonAug 15, 2025
What to do if my Edenwood LED TV remote control is not working?
- N
  nrobertsAug 15, 2025
  If your Edenwood LED TV remote control is not working, the batteries may be exhausted. Replace them with new ones. Also, ensure that the batteries are inserted correctly.
P
Patrick Jones DDSAug 21, 2025
Why does my Edenwood LED TV say 'no signal' on an input source?
- M
  Mark AguirreAug 21, 2025
  If your Edenwood LED TV displays 'no signal' on an input source, it might be because no device is connected to that source. Check the AV cables and connections from your device. Also, ensure that the device connected to the input source is switched on.
C
Christopher WarnerAug 26, 2025
Why is recording unavailable on my Edenwood ED50E00UHD-VE LED TV?
- T
  tina62Aug 26, 2025
  To enable recording on your Edenwood LED TV, first connect a USB storage device while the TV is switched off, then switch the TV on. If recording is still unavailable, verify that the storage device is correctly formatted and has sufficient space.
A
Amy FlowersAug 30, 2025
What to do if my Edenwood ED50E00UHD-VE says 'USB is too slow'?
- L
  Lindsey JonesAug 30, 2025
  If your Edenwood LED TV displays a 'USB disk writing speed too slow to record' message, try restarting the recording. If the error persists, your USB storage device may not meet the required speed. Try using a different USB storage device.

Summary

Safety Information

Markings on the Product

Explains symbols used on the product for safety precautions and restrictions.

Environmental Information

Features

Display Technologies

Details Ultra HD, HDR/HLG, and Dolby Vision for enhanced picture quality.

Standby Mode Picture

Use the TV as a digital picture frame by displaying images from a USB device.

TV Control and Operation

Control Button Functions

Learn to operate basic TV functions using the single control button on the device.

Standby Notifications

Understand automatic standby modes due to inactivity or no signal.

Main TV Menu Navigation

Home Menu Customization

Customize the Home menu by adding, deleting, or moving items for quick access.

Search and TV Guide

Search for content and access the electronic program guide for channel information.

Input Selection and Basic Operations

Changing Channels and Volume

Adjust channels and volume levels using the remote control.

Reset and Power Off

Perform TV restart, normal standby, or forced power off using the standby button.

TV Menu Options

Timers and Recordings Management

Set timers for events, manage recordings, and access app options.

Settings and Source Management

Configure TV settings, privacy, sources, and accessibility options.

Power and Antenna Connections

Power Connection

Connect the TV to a power source via the provided power cord.

Antenna Connection

Connect the aerial or cable TV plug to the ANT socket.

Licence and Disposal Information

Licence Notifications

Information on HDMI and Dolby trademarks and licensing.

Disposal Information

Guidelines for environmentally sound disposal of the TV and batteries.

Technical Specifications

TV Specifications

Details on broadcasting, reception, dimensions, power, and display resolution.

Wireless LAN Specifications

Information on wireless LAN transmitter power, frequency ranges, and country restrictions.

Remote Control

Remote Control Buttons

Overview of all buttons on the remote control and their functions for TV operation.

Media Playback and App Controls

Use media playback buttons and launch applications like Netflix and YouTube.

Connections

Audio and Data Connections

Connect audio (SPDIF, Headphone) and data (USB, Ethernet) devices to the TV.

HDMI and CI Interface

Connect devices via HDMI and use the Common Interface slot for conditional access modules.

Switching On;Off and First Time Installation

Powering the TV On and Off

Learn how to power the TV on, switch to standby, and power down completely.

First Time Installation Guide

Step-by-step process for initial TV setup, including language, country, and channel tuning.

USB Media Playback and Recording

Media Playback via USB

Play music, videos, and display photos stored on a USB device.

USB Recording and Timeshift

Record programs, use timeshift, and manage USB storage for recording features.

Recording and Media Management

Recording Settings and Options

Configure recording timers, playback speed, and delete recorded content.

Media Browser Functions

Browse and play media files from connected USB storage devices.

Advanced TV Functions

Loop;Shuffle and FollowMe TV

Set media playback modes and stream content to mobile devices.

CEC, ARC, and Game Mode

Control connected CEC devices, use Audio Return Channel, and optimize for gaming.

E-Manual Access

Access the electronic manual for detailed TV feature instructions.

Settings Menu Overview

Device and Picture Settings

Configure device features like virtual remote and adjust picture settings (mode, contrast, brightness).

Settings Menu - Picture and Sound

Advanced Picture and Sound Settings

Fine-tune picture aspects (colour, energy saving) and sound settings (Dolby Atmos, mode).

Settings Menu - Sound and Network

Sound Output and Network Configuration

Set sound output preferences and configure wired/wireless network connections.

Network Features

Scan networks, test internet speed, and manage advanced network settings.

Installation Menu Content

Channel Tuning and Network Scan

Perform automatic/manual channel scans and search for network channels.

Installation Settings and Service List

Configure optional installation settings, clear service lists, and view signal information.

System Menu - Accessibility and Privacy

Accessibility Features

Configure features for users with hearing or visual impairments, and general accessibility options.

Privacy Settings Management

Manage privacy privileges for smart TV applications, cookies, and tracking preferences.

System Menu - Parental Controls and Voice Assistants

Parental Control Options

Set PINs, lock menus, channels, maturity levels, and control internet access.

Voice Assistant Setup

Set up and configure Alexa and Google Assistant for voice control of TV functions.

System Menu - Software and Device Options

Software Upgrade and Device Info

Manage software updates, view application version, and access device information.

Power Up and Special Modes

Configure power-up modes, store mode, and special features like Biss Key.

General TV Operation

Channel List and Favorite Management

Edit channel lists, set favorite channels, and manage favorite lists.

Electronic Program Guide (EPG)

Browse broadcast schedules, view program details, and navigate channel guides.

EPG Features and Event Options

EPG Navigation and Event Actions

Search EPG by genre, view current/next events, set timers, and record events.

Troubleshooting and Tips

Power On and Picture Issues

Resolve problems with TV not turning on, poor picture quality, or no sound.

Troubleshooting - Operation and Recording

Remote Control and Signal Issues

Troubleshoot remote operation, input signal problems, and USB recording errors.

Supported File Formats for USB

Video, Picture, and Audio Formats

List of supported video, picture, and audio file formats for USB playback.

Subtitle File Formats

List of supported subtitle file formats for USB playback.

Supported DVI Resolutions

Connectivity - Wired and Wireless Setup

Wired Network Connection

Connect to a wired network using an Ethernet cable and configure settings.

Wireless Network Connection

Connect to a wireless network, scan for networks, and configure settings.

Connectivity Features

Wireless Connection Methods

Use WPS for direct connection or connect via WLAN with mobile devices.

Networked Standby and Mobile Sharing

Enable standby mode and share content with mobile devices.

Networked Standby and Wireless Display

Networked Standby Mode

Enable remote wake-up and control of the TV via network messages.

Wireless Display Function

Use the TV as a wireless display device for streaming content.

Connectivity Troubleshooting

Network Connectivity Issues

Troubleshoot wireless network availability, slow connections, and internet access problems.

Network Services

Audio Video Sharing

View and play media files stored on a network server or PC.

Apps and Internet Browser

Access installed apps, download new apps, and browse the internet.

HbbTV and Smart Center

HbbTV System Information

Understand Hybrid Broadcast Broadband TV services and interactive applications.

Smart Center Application

Use the mobile app for TV control, media sharing, and streaming content.

Mobile Device Interaction

Mobile App Features

Utilize mobile app for channel lists, recordings, EPG, smart remote, voice recognition, and keyboard.

Alexa Voice Control Setup

Alexa Ready and Setup Process

Prepare and set up the TV for voice control using Alexa devices.

Alexa Command Examples

Learn voice commands to control TV functions like power, volume, and channels.

Google Assistant Control Setup

Google Assistant Setup Process

Prepare and set up the TV for voice control using Google Assistant devices.

Google Assistant Command Examples

Learn voice commands to control TV functions like power, volume, and channels.

DVB Functionality Information

Warranty and Compliance

Warranty Conditions

Details the product warranty against manufacturing defects for a period of two years.

Declaration of Conformity

States compliance with EU directives for essential requirements.