Models with a display
show the time
remaining for the
programme to
end.
Do not open the dishwasher door during the wash process.
It could affect the programme.
IMPORTANT
When the dishwasher is
in operation and…
- You wish to put another
utensil in the dishwasher.
- You wish to change the
wash programme.
Once the programme has
ended, the STOP pilot
light comes on and a
continuous beep sounds
for 3 seconds.
7
END OF PROGRAMME
Unless the change affects
the duration of the wash
programme or involves the
time delay option. In this
case, press the ON/OFF
button ( ) to make any
changes.
Remember that the Start/Pause button is not the ON/OFF
button.
If you press the ON/OFF button during the wash process,
you will have to reprogramme the dishwasher.
IMPORTANT
1 . Press the Pause bu-
tton.
2 . Put the utensil in the
dishwasher and/or
change the wash pro-
gramme.
3 . Press the Start button..
25
6
THE WASH PROGRAMME
To Next Page
Loading...
