Need help?Do you have a question about the Edge STREET Series and is the answer not in the manual?
Important safety warnings regarding usage, wiring, and volume levels.
General advice for installing the speakers to ensure proper performance and reliability.
Details the 12-month warranty, purchase proof, and return policy.
Lists specific conditions and damages not covered by the warranty.
Covers international warranty procedures and copyright information.
Advice on fitting, cutting, and securing the woofer correctly.
Steps for surface mounting tweeters, including positioning and wire routing.
Method for flush mounting tweeters using a provided metal ring.
Alternative flush mounting method using a metal strip.
Diagram and instructions for wiring speakers to a headunit via crossover.
Diagram and instructions for wiring speakers to an amplifier via crossover.
Detailed technical specifications for ED305 and ED306 speaker models.
Illustrations and measurements for woofer mounting depths and diameters.
Contact details for technical support within the United Kingdom.
Information on how to contact international distribution agents for support.
Important safety warnings regarding usage, wiring, and volume levels.
General advice for installing the speakers to ensure proper performance and reliability.
Details the 12-month warranty, purchase proof, and return policy.
Lists specific conditions and damages not covered by the warranty.
Covers international warranty procedures and copyright information.
Advice on fitting, cutting, and securing the woofer correctly.
Steps for surface mounting tweeters, including positioning and wire routing.
Method for flush mounting tweeters using a provided metal ring.
Alternative flush mounting method using a metal strip.
Diagram and instructions for wiring speakers to a headunit via crossover.
Diagram and instructions for wiring speakers to an amplifier via crossover.
Detailed technical specifications for ED305 and ED306 speaker models.
Illustrations and measurements for woofer mounting depths and diameters.
Contact details for technical support within the United Kingdom.
Information on how to contact international distribution agents for support.
This document serves as a user guide for EDGE Street Series Component Speakers, specifically models ED305-E2 and ED306-E2. It provides essential information for owners, covering installation, wiring, and warranty details, ensuring users can achieve optimal performance and longevity from their product.
The EDGE Street Series Component Speakers are designed to enhance the audio experience in vehicles by providing high-quality sound reproduction. As component speakers, they typically consist of separate woofers and tweeters, often accompanied by a crossover network. This design allows for more precise sound staging and imaging within the vehicle's cabin, as the different frequency ranges (lows from the woofer, highs from the tweeter) can be directed from optimal positions. The speakers are intended for use in car audio systems, either connected directly to an OEM (Original Equipment Manufacturer) or aftermarket head unit, or powered by an external amplifier for increased output and control.
Installation: The manual provides detailed guidelines for installing both the woofers and tweeters.
Woofer Installation:
Tweeter Installation:
Tweeters can be fitted either flush mount or surface mount.
For optimal sound staging, tweeters should be located higher than the woofer, ideally within twelve inches (maximum) of it.
It is crucial to adjust the tweeter so it is focused towards the listener.
Surface Mount Installation:
Flush Mount Installation (Two Methods):
A suitable position is found, and the cut-out template for the tweeter is used to mark the area.
Before cutting, double-check for brake, fuel lines, or wiring harnesses.
Ensure the tweeter will not catch on moving parts (e.g., door/window handles) and that windows can be fully lowered if mounted in a door.
The hole is carefully cut out.
The entire tweeter is placed into the cut-out hole.
From the back, the metal ring is pushed over the rear of the casing until it is tight into the cut-out hole.
A suitable position is found, and the cut-out template for the tweeter is used to mark the area.
Before cutting, double-check for brake, fuel lines, or wiring harnesses.
Ensure the tweeter will not catch on moving parts and that windows can be fully lowered if mounted in a door.
The hole is carefully cut out.
The metal strip fixing strip is positioned centrally behind the cut-out hole.
The base of the tweeter case is attached to the metal strip using fixing screws.
The tweeter cable is passed through the hole in the center of the bottom of the case and the metal fixing strip.
The cable is pulled tight until the tweeter sits in the base.
The top of the tweeter casing is screwed to the base, with a caution not to over-tighten.
Wiring Connections:
Safety Precautions: The manual emphasizes several critical safety precautions:
Warranty: EDGE products come with a full 12-month warranty from the date of original receipt and proof of purchase.
International Warranty: For international customers, specific warranty procedures should be obtained by contacting the local EDGE dealer or distributor.
General Care: While not explicitly detailed as "maintenance," the cautions regarding exposure to dampness/moisture, correct connections, and avoiding physical damage (e.g., from moving parts or over-tightening screws) imply that proper installation and careful handling are key to the product's longevity and performance. The advice to keep sound levels clear without distortion also suggests that operating the speakers within their intended limits contributes to their maintenance and lifespan.
General| Sensitivity | 90 dB |
|---|---|
| Woofer Size | 6.5" |
| Tweeter Size | 1" |
| Configuration | 2-Way |
| Frequency Response | 20 kHz |
| Impedance | 4 Ohms |
| Tweeter Type | Soft Dome |
To Next Page
