12
Preparing the Freezer for Storage
If the freezer will not be used for a long time or is to be moved to another place, it will be necessary to
defrost the unit and dry the interior.
1. Disconnect the freezer from the power supply by removing the power plug from the wall socket.
2. Clean the inside of the unit with a mild detergent or hand soap solution. Dry thoroughly.
3. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells.
Caution: Store the unit out of reach from children. If you have children, you may want to
take precautions such as removing the door to prevent a child from being trapped inside.
!
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure eciency, top performance, and long life.
The exterior may be cleaned with a mild detergent or hand soap mixed with warm water. Do not use
solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft
clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor when exposed
to chlorine gas and moisture. Clean stainless steel using a cloth dampened with a mild detergent such
as lemon juice or vinegar and warm water solution. Never use an abrasive or caustic cleaning agent.
The freezer’s interior should be cleaned occasionally.
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reinsert items.
6. Reconnect power to the unit.
Exterior Cleaning
Interior Cleaning
To Next Page
Loading...
Need help?
General
