EdgeStar CWB2886FD - Product Specifications; Product Specifications Details

- 18 -
3.
DISASSEMB
LY
(Models：BR7001SS，BR7001SSOD，BR7001BL)
1、Remove four screws from the electrical box and take it
out .(figure 54)
Figure 54
2、Remove all the connector from the PCB board (figure 55)
Figure 55
3、Remove four screws from the PCB board and take it
out .(figure 56)
Figure 56
4、 The control board is like below. (figure 57)
Figure 57
5、Tear down the film.(figure 58)
Figure 58
6、Pull open the display board support bracket.(figure 59)
Figure 59
7、Pull open the fixer from the bracket. Take out the display
PCB board (figure 60)
Figure 60
8. The display board is like below. (figure 61)
Figure 61