EdgeStar CWF340DZ - Page 10

- 10 -
3. DISASS
EMB
LY
2. Unplug the led light connector. (figure 15)
Figure 15
3. Loosen two screws. (figure 16)
Figure 16
4. The LED light is like below. (figure 17)
Figure 17
LED light in lower zone
3. Loosen one screws. (figure 18)
Figure 18
4. Unplug the led light connector. (figure 19
Figure 19
7. Loosen two screws. (figure 20)
Screw
Figure 20
(Models：CWR1551DD )
LED Light in upper zone
1. Loosen four screws. (figure 21)
Figure 21
Screw
2. Pull out the electrical box. (figure 22)
Figure 22
3. Unplug all cable connectors. (figure 23)
4. Press the plastic nail supporting the control board with
forefinger and thumb. (figure 24)
Figure 23
Figure 24
5. The LED light is like below. (figure 25)
Figure 25
co
nnector