EdgeStar CWR361FD - Page 13

- 13 -
3.
DISASSEMB
LY
3. Unplug the led light connector. (figure 11)
connector
Figure 11
4.
Pull out the LED light. The LED light is like below.
(figure 12)
Figure 12
(Models：CWR361FD, BR7001SS，BR7001SSOD，
BR7001BL， CWR5631FD，CWB2886FD）
1.
Loosen one screw. (figure 13)
Figure 13
screw
2. Unplug the led light connector. (figure 14)
Figure 14
3. Loosen four screws. (figure 15)
Figure 15
screw
4.
Pull out the LED light. The LED light is like below.
(figure 16)
Figure 16
(Models：CWR181SZ)
1.
Loosen four screws. (figure 17)
Figure
17
screw screw
2.
Pull out the electrical box. (figure 18)
Figure 18
3. Unplug the led light connector. (figure 19)
Figure 19
connector