EdgeStar CWR361FD - Page 19

- 19 -
3.
DISASSEMB
LY
(Models：CWR70SZ)
1.
Loosen one screw. (figure 62)
Figure 62
2.
Pull out the electrical box from the cabinet.(figure 63)
Figure 63
3.Rem
ove the electrical box cover
(figure 64)
Figure 64
4.Rem
ove all the connector from the PCB board.
(figure
65)
Figure 65
5. Rem
ove four fixers from the PCB board . take out
the PCB board.
(figure 66)
Figure 66
6、 The control board &The display board is like below.
(figure 67)
Figure 67
(Models：CWR5631FD，CWB2886FD)
1、Remove four screws from the electrical box and take it
out.(figure 68)
Figure 68
2、Remove all the connector from the PCB board(figure 69)
Figure 69