EdgeStar CWR361FD - Page 30

- 30 -
3.
DISASSEMB
LY
3. Dismantle the compressor PTC starter and overload
protector. (figure 134)
Figure 134
4. The compressor PTC starter and overload protector is
like below. (figure 135)
Figure 135
(Models：CBR1501SLD，CBR1501SSOD ,BR7001SS，
BR7001SSOD，BR7001BL)
1. Open the box near compressor, The starter and overload
protector inside it.。 (figure 136)
Figure 136
2. Dismantle the compressor PTC starter and overload
protector. (figure 137)
Figure 137
3. The compressor PTC starter and overload protector is like
below. (figure 138)
Figure 138
(Models：CWR1211SZ)
1. Loosen one screw. (figure 139)
Figure 139