EDIFIER e255 - Connect to audio sources; Setup guide; Power on;Standby

5
English
6
English
↑
Device with RCA output
Device with optical audio output
Connect to audio sources
How to Connect Speakers Setup guide
Power on/Standby
Make sure on the speaker, display screen on center speaker, subwoofer indicator and surround speaker
status indicator will light up.
Note:
The speaker will display the decoder type depend on the input audio source signal, such PCM, Dolby D
and DTS surround.
Basic display configuration
Input source
Decoder type
Master volume
Dolby Pro Logic II On/Off Status
Dolby D Compression On/Off Status
OPT1
PLII
DOLBY
12
Dolby D
DOLBY D
COMP
or