EDIFIER MF200 User Manual

■ Troubleshooting
No sound
• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the
speaker.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes,
Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and
holding the " " button, then try again.
• Effective Bluetooth transmission range is 10 meters; please ensure that operation is
within that range.
• Try another Bluetooth device for connection.
Noise coming from speakers
• EDIFIER speakers generate little noise, while the background noise of some audio
devices are too high. Please unplug audio cables and turn the volume up, if no sound
can be heard at 1 meter away from the speaker, then there is no problem with this
product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com
and review the section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com
(Spanish/Portuguese) for local contact information.

EDIFIER MF200 Specifications

General

Magnet type	Neodymium
Driver diameter	36 mm
Number of speakers	1
Frequency range	100 - 20000 Hz
RMS rated power	8 W
Signal-to-Noise Ratio (SNR)	85 dB
Battery type	Built-in battery
Battery capacity	2200 mAh
DC input voltage	5 V
Battery life (max)	10 h
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	5.0
USB connector type	USB Type-C
Connectivity technology	Wired & Wireless
Recommended usage	Universal
Input current	1 A
Product type	Stereo portable speaker
Product color	Silver
Volume control	Buttons
Housing material	Aluminum
Amplifier class	D

Weight and Dimensions

Depth	53 mm
Width	293 mm
Height	45 mm
Weight	500 g