For more information, please visit our website:
www.edifier.com
@Edifier_Global @Edifier_Global@Edifierglobal
Model: EDF200068
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time to
time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product.
If any difference is found, the actual product prevails.
True Wireless Noise Cancellation In-Ear Headphones
NeoBuds S
Manual
1. Power ON when the case is
opened.
2. Power OFF when placed in the
case and the case is closed.
1. Placed in the case.
2. Press and hold the button on the case for
around 3s. LEDs will be lit one by one from
left to right in a circulating pattern.
3. Select "EDIFIER NeoBuds S" in your device
setting to connect.
1st Pairing
1. Open the case. LEDs will blink from left to right.
2. Select "EDIFIER NeoBuds S" in your device setting to connect.
Note:
For subsequent use, the earbuds will auto-connect to device used last time.
3. Left & Right Connection/Reset
1. Placed in the case.
2. Press 3 times the button on the case to
enter left & right connection and to clear
pairing records.
3. LEDs will be lit one by one from sides to
center in a circulating pattern.
4. After the earbuds are connected, it will enter
pairing mode automatically.
4. Controls
Note:
1. Both Earbuds mode switch: High noise cancellation mode & ambient
sound mode.
2. Single Earbud mode switch: Normal mode & ambient sound mode.
3. Customized controls via Edifier Connect App.
4. Images are for illustrative purposes only and may differ from the actual
product.
Left Touch Panel
Right Touch Panel
Indicators
3s
Indicators
x3
Indicators
x2x2
x2 x2
x3 x3
1. Power ON/OFF
EN
2. Pairing
To Next Page
Need help?
General
