EDIFIER R1280DBs User Manual

11
English
Troubleshooting
No sound
• Check if the speaker is ON.
• Try to turn up the volume using either the master volume control or remote control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect.
Disconnect from any Bluetooth device by pressing and holding the “ ” button in Bluetooth mode, then try again.
• Effective Bluetooth transmission range is 10 meters; please ensure that operation is within the range.
• Try another Bluetooth device for connection.
The R1280DBs does not turn on
• Check if main power is connected, or if the wall outlet is switched on.
Noise coming from speakers
• EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio
cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with
this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty
Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.

EDIFIER R1280DBs Specifications

General

Speaker type	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
Line-in	Yes
Audio RCA inputs	1
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Power source type	AC
Frequency range	51 - 20000 Hz
RMS rated power	42 W
Signal-to-Noise Ratio (SNR)	82 dB
Product color	Black
Recommended usage	Universal
Cables included	Audio (3.5mm), Optical, RCA

Weight and Dimensions

Depth	196 mm
Width	146 mm
Height	234 mm