TWS pairing of the left and right earbuds
Clear pairing records
Functional operation
Accept a call: single click the left or right earbud
Decline/end a call: press and hold the left or right
earbud
Pause/play: single click the left or right earbud
Previous track: double click the left earbud
Next track: double click the right earbud
Volume up: press and hold the right earbud
Volume down: press and hold the left earbud
• The left and right earbuds have finished TWS
pairing before leaving factory.
• When the earbuds are in the charging case,
respectively click the touch buttons of the left and
right earbuds for 5 times to enter TWS pairing
mode, the blue light will flash rapidly.
• After pairing is done, the blue light will flash
rapidly and then the red light will be steady lit.
• When the earbuds are powered on and
interconnected, and not connected with any
Bluetooth device, press and hold the touch button
of the left or right earbuds for 8 seconds to clear
pairing records of both earbuds.
To Next Page
Loading...
