EDIFIER TWS200 User Manual

• You may hear a warning tone when at
low battery level, please place the
earbuds in the case for charging.
●
Charge the Earbuds
● Charge the Charging Case
Warning: The rechargeable batteries that
provide power for this product must be
disposed properly for recycling. Do not
dispose of batteries in fire to prevent an
explosion.
Rated input: 5V 35mA(earbuds)
5V 350mA(charging case)
R
L
• If red light flashes six times rapidly (three
times per one second) when the case is
opened, it indicates the case has a low
battery capacity, please charge it in time.
Charging time: approx. 2 hours for a full
charging.
• Red light steady lit = charging
Red light off = fully charged
• Red light
■ User Guide

EDIFIER TWS200 Specifications

General

Control type	Touch
Product type	Headset
Product color	Black
Wearing style	In-ear
Volume control	Digital
Recommended usage	Calls/Music
International Protection (IP) code	IPX4
Charging case	Yes
Charging case type	Wired
Wireless range	10 m
3.5 mm connector	No
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Impedance	24 Ω
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	98 dB
Microphone type	Built-in
Number of microphones	2
Battery type	Built-in battery
Input current (earpieces)	0.06 A
Input voltage (earpieces)	5 V
Continuous audio playback time	8 h
Battery capacity (charging case)	500 mAh
Continuous audio playback time (with charging case)	32 h