EDIFIER TWS6 User Manual

● Power ON/OFF
• Power on automatically when taken out from the charging case;
• Power o automatically while placed in the charging case.
● TWS (true wireless stereo) Pairing of the Left and Right
Earbuds
The left and right earbuds have nished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the
steps below to re-pair:
• Place the earbuds in the charging case, then press and hold the pairing
button for 8 seconds to enter TWS pairing state, the indicator light
ashes rapidly;
• After pairing is done, blue lights of both earbuds ash slowly.
● Bluetooth Connection
• Open the charging case, then press and hold the pairing button to
enter pairing state, the indicator light ashes rapidly;
• Set mobile phone to search for and connect to either “EDIFIER TWS6 L”
or “EDIFIER TWS6 R”, after pairing is successful, the indicator light
ashes slowly.
• You can choose to use one earbud or both earbuds.

EDIFIER TWS6 Specifications

General

Brand	EDIFIER
Model	TWS6
Category	Headphone
Language	English