EDIFIER W806BT - Page 4

4. Function operation
Note:
(1) When use 3.5mm audio cable connecting, the headphone is in OFF status and the operation key
has no function.
(2) Enable voice function needs your mobile phone having voice function and in ON status.
(3) Remote play control (previous track/next track/pause/play) function need your mobile phone
supporting AVRCP protocol.
Function
Operation
Light/prompt tone
Music
Pause/play
Press multi-function key
-
Volume increase
Press volume increase key
Have a beep prompt tone in maximum
volume
Volume decrease
Press volume decrease key
-
Next track
Press and hold volume increase key
-
Previous track
Press and hold volume decrease
key
-
Call
Incoming
-
Have continuous beep prompt tone
Answer/end
Press multi-function key
Have a beep prompt tone
Reject
Press and hold multi-function key when
incoming a call
Have two beep prompt tone
Last number dial
press and hold multi-function key
Have extending beep prompt
tone
Enable voice function
Press multi-function key twice
-
Restore factory setting
Press and hold volume
increase/decrease key
Blue light quickly flashes three
times