EasyManua.ls Logo

EDIFIER W860NB - Operational Instructions and FAQs; Touch Control Illustration; Call Handling; Low Battery Troubleshooting

EDIFIER W860NB
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pause/play
Answer/reject call
Next track
Previous track
Volume up
Volume down
Slide upward
Slide downward
Slide right
Slide left
Press twice
When the volume is set at the maximum level, there will be a prompt tone.
Touch Control illustration
Functional Operation Instructions
Calling
Answer call: double press
Reject call: press and hold
Hang up call: double press
Answer call: press
Reject call: press and hold for 2
seconds
Hang up call: press
Enable voice assistant: double
press
Disable voice assistant: double
press
NC
Red light instead of blue light ashes.
The headphone is at low battery level, please recharge the headphone.
Red light is o during charging.
Please ensure the charging device is correctly connected with the headphone.
When the headphone is not used for long periods of time, the battery will
enter sleep state, it needs to charge about 30 minutes and then the red light
will be lit.
No sound
Check if the headphone is operating.
Check if the headphone volume is at an appropriate level.
Check if the headphone is correctly connected with mobile phone.
Check if the headphone is operating within a normal working range.
Call eect of the headphone is bad.
Check if mobile phone is in an area with strong signal.
Please ensure the headphone is within effective distance (10m) and no
obstacle between the headphone and mobile phone.
When playing music, cannot control pause/play/previous track/next track
via headphone.
Please ensure the paired device support AVRCP (Audio/Video Remote Control
Profile) profile.
FAQs

Related product manuals