EasyManuals Logo

EDIFIER W860NB User Manual

EDIFIER W860NB
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
During using, please read the following suggestions carefully.
Keep the product away from humid places to avoid affecting internal circuit.
Do not use the product during intense exercise or with much sweat to prevent
sweat from dropping into the product to make damage.
Do not put the product in places exposed to sun or with high temperature.
High temperature will shorten service life of electronic components, damage
battery and deform plastic components.
Do not put the product in cold places to avoid damaging internal circuit board.
Do not dismantle the product. Non-professional personnel may damage
the
product.
Do not drop, strongly vibrate, strike the product with hard object to avoid
damaging internal circuit.
Do not use drastic chemicals or cleaner to clean the product.
Do not use sharp objects to scratch product surface to avoid damaging shell
and affecting looking.
If the product cannot operate properly, please send it to your qualified
maintenance agency.
Maintenance
Red light instead of blue light ashes.
The headphone is at low battery level, please recharge the headphone.
Red light is o during charging.
Please ensure the charging device is correctly connected with the headphone.
When the headphone is not used for long periods of time, the battery will
enter sleep state, it needs to charge about 30 minutes and then the red light
will be lit.
No sound
Check if the headphone is operating.
Check if the headphone volume is at an appropriate level.
Check if the headphone is correctly connected with mobile phone.
Check if the headphone is operating within a normal working range.
Call eect of the headphone is bad.
Check if mobile phone is in an area with strong signal.
Please ensure the headphone is within effective distance (10m) and no
obstacle between the headphone and mobile phone.
When playing music, cannot control pause/play/previous track/next track
via headphone.
Please ensure the paired device support AVRCP (Audio/Video Remote Control
Profile) profile.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EDIFIER W860NB and is the answer not in the manual?

EDIFIER W860NB Specifications

General IconGeneral
2.5 mm connectorNo
Battery charger includedYes
Number of products included1 pc(s)
Quantity1
Cables includedAudio (3.5mm), USB
Frequency band2.402 - 2.48 GHz
Wireless range10 m
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP, HFP, HSP
Connectivity technologyWireless
Impedance32 Ω
Ear couplingSupraaural
Headphone frequency20 - 20000 Hz
Headphone sensitivity100 dB
Battery typeBuilt-in battery
Standby time800 h
Battery capacity1400 mAh
Battery recharge time3 h
Headset typeBinaural
Product typeHeadset
Product colorBlack, Silver
Wearing styleHead-band
Volume controlTouch
Recommended usageCalls/Music
Microphone typeBuilt-in

Related product manuals