EdilKamin MYRNA User Manual

26
ENGLISH
USER INSTRUCTIONS
USER
In AUTOMATIC mode:
Setting of the room temperature (read by the remote control, which should be located in the room where the
product is installed). Modify the desired temperature using the “+” and “–” buttons.
AUTOMATIC MANUAL
In MANUAL mode:
Setting of the power
Modify the power level (displayed by the flame symbol) using the “+” and “–” buttons.
For example: press any button and the display will activate, then press
the button
For example: press any button and the display will activate, then
press the button
“flame”
symbol
The setting can be confirmed with the button or by waiting 5" without pressing any button.
After confirming, SET will stop flashing.
AUTOMATIC and MANUAL setting
Press the AUTO/MAN button for a few seconds to switch from manual to automatic mode or vice versa.
NOTE
With Timer and product “off », it is not possible any regulation (power nor temperature)

EdilKamin MYRNA Specifications

General

Brand	EdilKamin
Model	MYRNA
Category	Pellet stove
Language	English