Security Features
• Support data encryption: WEP(64/128-bit), WPA, WPA2,
IPSec VPN.
• Support various authentication methods: WPA-PSK, WPA2-
PSK,
IEEE 802.1x(EAP-MD5, EAP-TLS, CHAP, PEAP).
• Provides VPN termination of IPSec tunnels to enhance
wireless security.
• Support VPN pass-through (IPSec and PPTP).
• Support DoS attack protection
• Support MAC Access Control List
• Support user Black List
• Allow MAC address and user identity binding for local user
authentication
AP Management
• Support IEEE 802.11b/g AP (EW-7206APg).
• Provide centralized management via HTTP/SNMP interface.
• Discover APs automatically.
• Add and delete APs directly from the device list.
• Enable or disable APs easily via management interface.
• Provide MAC Access Control List for each AP.
• Maintain configuration profiles of APs via local terminal.
• Upgrade and restore AP’s firmware via one single
management interface.
• Monitor AP’s system status and associated client stations.
• Recover APs automatically when the system fails.
• Provide alarms and warnings of APs’ system status when
necessary.
• Detect third-party APs via Monitor IP feature.
Monitoring and Reporting
• Monitor online users’ status.
• Monitor network devices by IPs.
• Alert WAN connection failure.
• Support Syslog for diagnosing and troubleshooting.
• Provide user network traffic history.
Network Access Controller
Network Access Controller
To Next Page
Loading...
Need help?
General
