Edimax AR-7084A Specifications

Edimax AR-7084A

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ADSL2+ Router Series

ADSL2+ Router Series

(AR

(AR

-

-

7084A, AR

7084A, AR

-

-

7084B)

7084B)

Key Features

• Supports ADSL standard G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3

(ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex

A,B

• Supports MAC address filtering

• Supports NAT (Network Address Translation) IP Sharing

• Supports Virtual Server, Port Forwarding and DMZ

• Supports VPN Pass Through (IPSec/PPTP/L2TP)

• Supports Anti-DOS SPI Firewall

• Supports DHCP Server and Client

• Supports Access Management: ACL, IP Filtering, MAC Address

Filtering and URL Blocking

• Supports UPnP, SNMP and DDNS

• Web Configuration (Remote Configuration)

• Firmware Upgradable

Built-in High Performance ADSL2/2+ Modem

This ADSL router runs at speeds up to 24Mbps downstream and 1Mbps

upstream, providing higher data rates than traditional ADSL systems.

Also, it is backward compatible with existing ADSL services and

interoperable with legacy equipment

.

Support ADSL2/2+ Standard

The ADSL router supports ADSL standard: G.992.1 (G.dmt), G.992.2

(G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5

(ADSL2+) for Annex A, B. (Annex A and B are supported in different

H/W platform)

Enhance ADSL2+ Router

Enhance ADSL2+ Router

1 RJ-11 ADSL Port + 4 Port Switch ADSL Modem/Router

Other manuals for Edimax AR-7084A

User Manual86 pages

Quick Installation Guide8 pages

Install Guide22 pages

Questions and Answers:

R
ronald09Aug 6, 2025
What to do if I forget my Edimax AR-7084A Network Router username or password?
- T
  Travis GarciaAug 6, 2025
  If you've forgotten your password after changing it, you'll need to upload the default configuration file. Note that this will erase all custom settings and restore the factory defaults, including the password. Alternatively, press the Reset button for five seconds, then release it. When the LAN LED begins to blink, the defaults have been restored. Remember, the default username is "admin", and the default password is "1234". Ensure you enter these correctly, as they are case-sensitive. It's highly recommended to change these defaults and store them securely.
M
meganrossAug 10, 2025
How to fix Edimax AR-7084A Network Router if I cannot access the web management?
- R
  Robert MurphyAug 10, 2025
  First, ensure you're using the correct IP address for your Edimax Network Router. Double-check the router's IP address. Also, verify that your computer and the router's IP addresses are on the same subnet for LAN access. If you've changed the router's LAN IP address, enter the new address as the URL.
L
Lauren CharlesAug 15, 2025
Why is the ADSL connection failing on my Edimax AR-7084A?
- C
  Christopher DillonAug 15, 2025
  Check the cable connections between the ADSL port and the wall jack, ensuring the ADSL LED on the rear panel is lit. Verify that the VPI, VCI, encapsulation type, and multiplexing settings match those provided by your ISP. Restart the router; if issues persist, confirm these settings with your ISP.
K
Kendra Jackson PhDAug 19, 2025
What to do if I cannot access the Web Management of Edimax AR-7084A Network Router after activating the ACL function?
- M
  Mary ValenciaAug 19, 2025
  When ACL is activated, you need to set ACL rules to allow users to use specific services. Verify that you have set these rules; otherwise, all users will be restricted from using any service from LAN or WAN. If you cannot access the Web Management, press and hold the Reset button for over 5 seconds to restore the router to its default settings. After the router restarts, log in using the default IP Address 192.168.2.1.
M
Melissa CrossAug 23, 2025
Why can't my Edimax AR-7084A Network Router get a WAN IP address from the ISP?
- J
  Jordan MurilloAug 23, 2025
  The ISP provides the WAN IP address after authenticating you, which may involve a username and password, MAC address, or hostname. If you're using PPPoE or PPPoA encapsulation, ensure you've entered the correct Service Type, User Name, and Password, paying attention to the correct casing.
J
Jennifer ConradAug 27, 2025
What to do if the ADSL LED on my Edimax AR-7084A Network Router does not light up?
- M
  michael74Aug 27, 2025
  Check the telephone wire and connections between the ADSL2+ Router's DSL port and the wall jack. Ensure that your telephone company has checked your phone line and configured it for DSL service. Try resetting your ADSL line to reinitialize your link to the DSLAM.
B
Brandi RobinsonSep 1, 2025
How to troubleshoot if the LAN LED on my Edimax AR-7084A Network Router doesn't light up?
- A
  Amanda HallSep 1, 2025
  Check the Ethernet cable connections between your ADSL2+ Router and the computer or hub. Also, check for faulty Ethernet cables. Ensure your computer’s Ethernet card is working properly.

Edimax AR-7084A Specifications

General

Device Type	Wireless Router
Frequency Band	2.4 GHz
Wireless Speed	Up to 54 Mbps
Security	WEP, WPA, WPA2
Ports	1 x WAN, 4 x LAN
Wireless Standard	802.11b/g
WAN Ports	1
LAN Ports	4
Antenna	2 x 5dBi
Features	NAT, Firewall
Weight	300 g

Related product manuals

Preview: Edimax AR-7064+

Edimax AR-7064+

Preview: Edimax AR-7211A

Edimax AR-7211A

Preview: Edimax AR-7186WnA

Edimax AR-7186WnA

Preview: Edimax AR-7167WnA

Edimax AR-7167WnA

Preview: Edimax AR-7286WnA

Edimax AR-7286WnA

Preview: Edimax AR-7182WnA

Edimax AR-7182WnA

Preview: Edimax AR-7287WnA

Edimax AR-7287WnA

Preview: Edimax APC500

Preview: Edimax router

Preview: Edimax CV-7438nDM

Edimax CV-7438nDM

Preview: Edimax BR-6428nS V3

Edimax BR-6428nS V3

Edimax BR-6428nS 9dBi