Need help?Do you have a question about the Edimax es-3116p and is the answer not in the manual?
General| Ports | 16 |
|---|---|
| PoE Ports | 16 |
| Switch Type | Managed |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table | 8K |
| Power Input | 100-240V AC, 50/60Hz |
| Jumbo Frame | 9K |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| Dimensions | 440 x 44 x 180 mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | 70 °C |
| Humidity | 10% to 90% (non-condensing) |
Equipment tested for Class B digital device limits and potential radio frequency interference.
Device and antenna must not be co-located; operation subject to interference conditions.
Product may cause radio interference in domestic environments, requiring user measures.
Lists all items included in the switch package for users.
Highlights the switch's compliance, architecture, and negotiation capabilities.
Details the physical layout, ports, and diagnostic LEDs on the switch's front panel.
Specifies temperature, humidity limits, and proper placement to avoid damage.
Instructions for using RJ-45 ports and UTP cables for network connections.
Steps to connect the power adapter and ensure the power LED is lit.
Solutions for power LED not lit and link/activity LED issues.
To Next Page
