Edimax ES-1008P User Manual

8-Por
t
Description
TheES‐1008Pisan8‐portFastEthernetswitchwith8
P
networkenvironments.Thedevice'scompactsizemak
e
ComplieswithIEEE802.3atPoweroverEthernet(PoE
)
TheES‐1008Pfeatures8IEEE802.3atPoweroverEthe
r
perport.Itcanconvertstandard100‐240VACpoweri
n
tosupplypowertoIEEE802.3atcompliantnetworkac
c
verifywhethertheconnecteddeviceisIEEE802.3atco
m
throughtheLANcable.TheES‐1008Pcanconnectwith
camerasandIPphones.Itisthebestsolutionforwhen
outletsaretoofarfromthedevice.
NoSpecialNetworkingCableRequired
ThestandardCat‐5EthernetcableisusedtolinktheE
S
cantransmitbothdataandpower.Noseparatepower
installationtimeandcosts.
Copyright©2012EdimaxTechnologyCo.Ltd.Allrightsreserved.Maximu
m
networkconditionsandenvironmentalfactors.Productspecificationsand
d
t
Fast Ethernet PoE+ Switch
ES-1008P
P
oE ports,designedforuseinsmallormediumsized
e
stheES‐1008Pidealforuserswithlimitedspace.
)

r
net(PoE)ports,whichsupplyupto30wattsofpower
n
tolow‐voltageDC,whichrunsoverexistingLANcables
c
essories.TheES‐1008PalsofeaturesPoE detection,to
m
pliant;ifitisnotaPoE device,onlydatawillbesent
avarietyofPoE products,includingaccesspoints,IP
poweroutletsaredifficulttoinstallorthepower
S
‐1008Pandthepowereddevices.ThisEthernetcable
cableisneededforthepowereddevices,thusreducing
m
performance,actualdatarates,andcoveragewillvarydependingon
d
esignaresubjecttochangewithoutnotice.

Edimax ES-1008P Specifications

General

Ports	8
PoE Ports	8
PoE Standard	IEEE 802.3af
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table	1K
Power Budget	130W
Packet Buffer Memory	1.5 MB
Power Supply	Internal
Weight	1.2 kg
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af
LED Indicators	Power, Link/Act, PoE
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% (non-condensing)

Summary

ES-1008P PoE+ Switch Overview

Product Description

Details the ES-1008P as an 8-port Fast Ethernet switch designed for small/medium networks.

IEEE 802.3at PoE Compliance

Highlights compliance with IEEE 802.3at PoE, supplying up to 30W per port and detecting compliant devices.

Standard Ethernet Cable Requirement

Explains that standard Cat-5 Ethernet cables transmit both data and power, reducing installation costs.

Edimax ES-1008P Technical Specifications

Key Features and Standards

Lists compliance with IEEE 802.3 standards, auto-detection, and energy efficiency features.

Transmission Media and Power

Details supported transmission media (Cat. 3/4/5) and PoE power budget capabilities.

Device Specifications

Covers dimensions, weight, temperature, humidity, LED indicators, and power requirements.