Edimax GP-101ST - Page 3

3
Code
Name
Indication / Function
Hardware Overview
A
DATA OUT
Supports 10/100/1000 base Ethernet.
Connect to the Ethernet device with standard
Ethernet cable to transmit data.
B
DC OUT
Connect to the power port of the Ethernet device
with the provided power cable to supply the
power of 5V, 9V,or 12V.
C
PWR+DATA IN
Supports 10/100/1000 PoE over Ethernet.
Connect to the PSE or PoE Injector with a
standard Ethernet cable.
D
DC OUT Switch
Choose the DC output of 5V, 9V or 12V by
adjusting the slide switch to the left or right.
Please make sure that the DC output power is
correct, a different voltage may destroy the device.
LED Status
1
POWER LED
For Adjustable 5VDC / 9VDC / 12VDC