To Next PageTo Next Page
Need help?Do you have a question about the Edirol PCR-A30 and is the answer not in the manual?
Explains the meaning of safety symbols used in the manual.
Instructions and precautions for the power supply unit and its usage.
Guidelines for positioning the unit to avoid damage and interference.
Recommendations for cleaning and maintaining the unit.
Information regarding data loss during repairs and liability.
Further general advice and warnings for safe operation.
Description of the front panel controls and their functions.
Description of the rear panel connectors and ports.
Steps for connecting the PCR-A30 and installing drivers on Windows.
Steps for connecting the PCR-A30 and installing drivers on Macintosh.
Explains the purpose and function of device drivers in computer systems.
How to set audio and MIDI I/O devices in Windows XP and 2000/Me.
How to adjust audio latency by changing the buffer size settings.
Guide to using ASIO Direct Monitor for low-latency monitoring.
Diagram and explanation of essential physical connections for the device.
Block diagrams illustrating audio and MIDI signal paths.
How to listen to computer audio playback through the PCR-A30 or headphones.
Description of the default PLAY mode and its functions.
Explains pitch bend, modulation, octave shift, and transpose functions.
How to set the MIDI transmit channel for keyboard and bender.
How to transmit program change messages to select sounds.
Procedure to activate Panic mode for clearing stuck notes.
How to select and recall memory sets stored in the unit.
How to enter Memory mode to change stored settings.
Procedure to activate snapshot mode for transmitting controller states.
Entry point for assigning MIDI messages and system settings.
Overview of the PCR-A30's internal memory structure and usage.
Procedure for receiving bulk data into the PCR-A30.
Settings related to F8 Clock transmission (ON/OFF, Tempo, Port).
Enabling/disabling USB audio and selecting sampling frequency/driver mode.
Settings for direct monitoring of input signals and adjusting input gain.
Information on preset controller assignments for various applications.
Solutions for common problems encountered with the PCR-A30.
Technical details on MIDI messages transmitted and recognized by the unit.
Technical data and specifications of the PCR-A30.
Preset controller assignments for the GM2 standard.
Specific memory set for SONAR 2 (Memory 1).
Specific memory set for SONAR 2 (Memory 2).
Specific memory set for SONAR 2 (Memory 3).
Specific memory set for SONAR 2 (Memory 4).
Specific memory set for Cubase 5/SX (Memory 5).
Specific memory set for Cubase 5/SX (Memory 6).
Specific memory set for Cubase 5/SX (Memory 7).
Specific memory set for Cubase 5/SX (Memory 8).
Specific GS memory set (Memory A).
Specific XG memory set (Memory D).
Specific XG memory set (Memory E).
Common issues and solutions when installing or using the USB driver.
Steps to diagnose and resolve driver installation failures.
Resolving system instability issues related to PCR-A30 connection.
Troubleshooting steps for no computer sound output.
Common MIDI playback and recording issues and their solutions.
Details on system exclusive and universal non-realtime messages received.
Details on channel voice messages transmitted by the PCR-A30.
Explains the meaning of safety symbols used in the manual.
Instructions and precautions for the power supply unit and its usage.
Guidelines for positioning the unit to avoid damage and interference.
Recommendations for cleaning and maintaining the unit.
Information regarding data loss during repairs and liability.
Further general advice and warnings for safe operation.
Description of the front panel controls and their functions.
Description of the rear panel connectors and ports.
Steps for connecting the PCR-A30 and installing drivers on Windows.
Steps for connecting the PCR-A30 and installing drivers on Macintosh.
Explains the purpose and function of device drivers in computer systems.
How to set audio and MIDI I/O devices in Windows XP and 2000/Me.
How to adjust audio latency by changing the buffer size settings.
Guide to using ASIO Direct Monitor for low-latency monitoring.
Diagram and explanation of essential physical connections for the device.
Block diagrams illustrating audio and MIDI signal paths.
How to listen to computer audio playback through the PCR-A30 or headphones.
Description of the default PLAY mode and its functions.
Explains pitch bend, modulation, octave shift, and transpose functions.
How to set the MIDI transmit channel for keyboard and bender.
How to transmit program change messages to select sounds.
Procedure to activate Panic mode for clearing stuck notes.
How to select and recall memory sets stored in the unit.
How to enter Memory mode to change stored settings.
Procedure to activate snapshot mode for transmitting controller states.
Entry point for assigning MIDI messages and system settings.
Overview of the PCR-A30's internal memory structure and usage.
Procedure for receiving bulk data into the PCR-A30.
Settings related to F8 Clock transmission (ON/OFF, Tempo, Port).
Enabling/disabling USB audio and selecting sampling frequency/driver mode.
Settings for direct monitoring of input signals and adjusting input gain.
Information on preset controller assignments for various applications.
Solutions for common problems encountered with the PCR-A30.
Technical details on MIDI messages transmitted and recognized by the unit.
Technical data and specifications of the PCR-A30.
Preset controller assignments for the GM2 standard.
Specific memory set for SONAR 2 (Memory 1).
Specific memory set for SONAR 2 (Memory 2).
Specific memory set for SONAR 2 (Memory 3).
Specific memory set for SONAR 2 (Memory 4).
Specific memory set for Cubase 5/SX (Memory 5).
Specific memory set for Cubase 5/SX (Memory 6).
Specific memory set for Cubase 5/SX (Memory 7).
Specific memory set for Cubase 5/SX (Memory 8).
Specific GS memory set (Memory A).
Specific XG memory set (Memory D).
Specific XG memory set (Memory E).
Common issues and solutions when installing or using the USB driver.
Steps to diagnose and resolve driver installation failures.
Resolving system instability issues related to PCR-A30 connection.
Troubleshooting steps for no computer sound output.
Common MIDI playback and recording issues and their solutions.
Details on system exclusive and universal non-realtime messages received.
Details on channel voice messages transmitted by the PCR-A30.
General| Number of Keys | 32 |
|---|---|
| Connectivity | USB, MIDI In/Out |
| Buttons | Assignable buttons |
| Power Supply | USB bus power |
| Control Elements | Pitch bend wheel, modulation wheel, assignable knobs |
