Edirol Studio Canvas SD-90 User Manual (English)

Other manuals for Edirol Studio Canvas SD-90

Questions and Answers:

A
Andrea CampbellAug 22, 2025
Why is there no sound from my Edirol Musical Instrument?
- G
  George PadillaAug 22, 2025
  If you're not getting any sound from your Edirol SD-90 Musical Instrument, here are a few things to check: * Make sure the SD-90 is set as the audio output destination on your computer. * Verify the OUTPUT 1 jacks are properly connected to your audio playback equipment. * Ensure both your audio equipment and the SD-90 are powered on. * Adjust each knob to the appropriate level. Also, the driver must be installed to play back audio data. If multiple applications are running, it can cause errors. Try exiting all applications using the SD-90. If problems persist, turn the SD-90 off and on again.
T
Tony ReyesSep 1, 2025
Why is the volume from a device connected to the input jacks too low on my Edirol Musical Instrument?
- K
  Kelly MorseSep 1, 2025
  If the volume from a device connected to the input jacks of your Edirol SD-90 Musical Instrument is too low, use a cable without a built-in resistor (e.g., Roland PCS series). For details on setting the external input level of the SD-90, refer to the SD-90 owner’s manual.
B
Brandy Bond DDSAug 31, 2025
Why is the sound from devices connected to the input jack not heard in the headphones connected to my Edirol Musical Instrument?
- C
  Carla CarpenterAug 31, 2025
  If you cannot hear sound from devices connected to the input jack in your headphones when using the Edirol SD-90 Musical Instrument, turn the knobs clockwise to adjust the volume. For more detailed information on the SD-90’s recording source settings, refer to the SD-90 owner’s manual.
C
casey06Aug 30, 2025
How to fix distortion in sound from devices connected to the input jacks of my Edirol Musical Instrument?
- S
  sanchezashleyAug 30, 2025
  If you are experiencing distortion in the sound from devices connected to the input jacks of your Edirol SD-90 Musical Instrument, and you are inputting audio through the MIC/GUITAR jack or the INPUT jacks, use the GAIN knob to reduce the input level.
E
Erin ChanAug 28, 2025
Why can't I record MIDI on my Edirol Musical Instrument?
- J
  jeffreysullivanAug 28, 2025
  To record MIDI tracks using the Edirol SD-90 Musical Instrument, select either [SD-90InOut 1] or [SD-90MIDI InOut 2] as the MIDI input device.
M
Morgan WilsonAug 27, 2025
Why can't I play back MIDI on my Edirol Musical Instrument?
- M
  Michelle WilliamsAug 27, 2025
  To play MIDI tracks using the Edirol SD-90 Musical Instrument, you must correctly install the SD-90 driver. Also, make sure to select either [SD-90 Port A] or [SD-90 Port B] as the MIDI output device.
W
William WellsAug 26, 2025
What to do if an 'Unknown driver found' dialog box appears when installing Edirol Musical Instrument driver?
- S
  Sara MillerAug 27, 2025
  If you encounter an 'Unknown driver found' dialog box while installing the driver for your Edirol SD-90 Musical Instrument, first ensure that the SD-90 and your computer are correctly connected via a USB cable. If the issue persists, refer to the manufacturer of your computer. Also check for and delete any unknown drivers.
J
jasonhendersonAug 25, 2025
What to do if my Edirol Musical Instrument is not detected in OMS or FreeMIDI settings?
- N
  nicole08Aug 26, 2025
  If your Edirol SD-90 Musical Instrument is not being detected when making OMS or FreeMIDI settings, try the following: * Turn the power of the SD-90 off, then on again, and reconnect the USB cable. * Leave the SD-90’s USB cable connected, and restart your Macintosh. * Connect the SD-90 to a USB connector directly on the Macintosh. * Delete FreeMIDI-related files from the Extensions folder.
C
colin36Aug 25, 2025
How to install the Edirol Musical Instrument driver correctly?
- C
  Christina WatsonAug 25, 2025
  To correctly install the driver for your Edirol SD-90 Musical Instrument, ensure the CD-ROM is properly inserted into your drive. Clean the disc or lens if necessary. Note that the software cannot be installed from a networked CD-ROM drive. Also, free up space on your computer by deleting unneeded files and emptying the recycling bin. Check that the USB connector of your computer is connected to the SD-90 by a USB cable and the SD-90’s POWER switch is pressed inward. You may also need to install OMS or FreeMIDI.