Edis EA54 - User Manual

Mary MasonAug 7, 2025

What to do if my Edis Sound bar has no sound?

J
Jill MayoAug 7, 2025
If your Edis Sound bar isn't producing any sound, here are a few things to check: * Ensure the main power supply is switched on at the wall socket. * Verify the power switch at the amplifier base panel of the active speaker is on. * Confirm the volume control is on and showing a red light; if there's no red light, the power source might be faulty, or the fuse in the power plug could be blown. * Make sure the A and B selector switch is set to the correct input. * Check that the audio cables are correctly connected to your audio source. * Confirm that the audio source is active and playing.

output power

18 Watts x 2

drive units

4" x 2 + 1" x 2

impedance

4 ohms

frequency response

20Hz - 20 kHz

separation

>35 dB

signal/noise ratio

>80 dB

input sensitivity

<450 mV

distortion THD

<0.2%

Questions and Answers