Congratulations on purchasing an EDISΙON picco T265 pro
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Package Contents Documentation Service note
1
2
1
HDMI in
2
USB 2 USB 1
Receiver picco T265 pro
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here.
Front Panel
1
POWER button:
( )
Activates/Deactivates the device
2
Buttons: (-/+, ) for moving in the program lists and for volume adjustment
3
Display LED, displays current information
4
Infrared sensor for the reception of remote control commands
Back Panel
5
ANT IN: Input for connecting to terrestrial or cable signal
from the antenna
6
S/PDIF: Audio interface for amplier/audio console
7
HDMI: Connection to an HDTV quality TV
8
SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
9
Powering (DC 5V) via the USB port of the TV
or with 5V power supply
Subpage
10
IR IN: Infrared connection port
11
/ USB: Connection for USB storage devices
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated and inspected by a
qualied professional with a digital
TV-level-measuring instrument.
•
Connect the receiver using HDMI cable via the HDMI output
port to your TV’s HDMI input port.
•
Then connect the coaxial cable from the terrestrial antenna
to the ANT IN input of the receiver.
•
Insert the batteries into the remote control. Notes on
the remote control can be found on the back of these
instructions.
•
For STB powering (DC 5V) connect the receiver to the
power supply or via TV USB port.
•
The receiver starts with the BOOT process and is
operational within a short time.
Please contact
your EDISION
specialist dealer
for any further
support
and service.
USB power
supply (5V)
USB power cable
HDMI:
Output receiver
HDMI cable
TV set
connection
panel
Use an HDMI
input!
33mm
picco T265 pro
Digital Terrestrial & Cable Receiver DVB-T2/C H.265/HEVC
coaxial-wire Antenna
After the rst start,
choose your language
86 mm
125 mm
+
-
1
2
4
3
5
6
7
8
9
IR IN USB
10
11
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
Support
USB
For information about EDISION Hardware or Software
matters, please contact support@edision.gr or visit the
DOWNLOAD CENTER: https://www.edision.gr/en/support
ANT IN:
coaxial-wire input from
terrestrial / cable signal
“The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.”
Power socket
To Next Page
Need help?
General