Edison DJ PRO 6100+ - DJ Controller Operation; Channel Volume and Fader Controls

DJ PRO 5000
Make sure all Volume is up turned up.
Master Volume -
Gain Channel 1 –
(Adds Distortion & Volume)
- Gain Channel 2
(Adds Distortion & Volume)
Channel 1 Volume Slide -
- Channel 2 Volume Slide
The X-Fader determines which side of the Scratch 2500 plays music through the Speakers – If both Channel Volumes are up the music should
bleed if positioned in the middle. Channel One will play with the X-Fader to the Left and Channel 2 will play when the X-Fader is to the Right