Need help?Do you have a question about the Edwards FireWorks FW-UL6W and is the answer not in the manual?
Provides an overview of the FW-UL6W workstation and its purpose.
Details the hardware platform and features of the FW-UL6W workstation.
Lists available software products for FW-UL6W workstations and their descriptions.
Describes the features and components located on the front panel of the FW-UL6W.
Details the features and components located on the rear panel of the FW-UL6W.
Explains the internal cable connections within the FW-UL6W workstation.
Lists compatible hardware accessories for the FW-UL6W workstation.
Outlines the required minimum system configurations for various FireWorks applications.
Provides detailed technical specifications for the FW-UL6W workstation.
Lists the items included with the FW-UL6W workstation.
Details the process of installing the FW-UL6W workstation.
Step-by-step guide for installing the FW-UL6W on a workbench.
Instructions for installing the FW-UL6W workstation in a rack.
Explains how to connect the FW-UL6W workstation to AC power.
Guide for connecting the keyboard and mouse to the FW-UL6W workstation.
Instructions for connecting monitors to the FW-UL6W workstation.
Details how to connect Ethernet ports on the FW-UL6W workstation.
Explains how to connect serial devices to the FW-UL6W workstation.
Instructions for securing I/O cable connections on the FW-UL6W workstation.
General steps for setting up the FW-UL6W workstation after installation.
How to power on the FW-UL6W workstation.
Steps for logging into the FW-UL6W workstation.
Guide for changing Windows user account passwords on the FW-UL6W.
Instructions for configuring monitor settings for the FW-UL6W workstation.
Steps for setting up touch screen functionality for the monitors.
How to connect a PT-1S system event printer to the FW-UL6W.
Explains nodes in a FireWorks Life Safety Network.
How to connect an EST3 control panel to the FW-UL6W.
Connects EST3 using FW-SP4I serial port.
Connects EST3 using MN-COM1S.
How to connect an EST3X control panel to the FW-UL6W.
Connects EST3X using a 3X-ETHx card.
How to connect a Bosch/Radionics D6600 receiver.
Configuration steps for D6600 and related equipment.
Connects iO Series control panels to FW-UL6W for monitoring.
Guide for installing the com0com driver for virtual COM ports.
Connects OH Network Receiver to a virtual COM port.
Connects OH2000E digital receiver to a virtual COM port.
Connects FW-HSSX1 VESDA interface to FW-UL6W.
Details programming requirements for UL and ULC standards.
How to disable the automatic re-sounding of trouble signals.
Configuration for automatic cancellation of workstation silence.
Adjusting the delay for posting AC power fail events.
Modifying how events are automatically selected and displayed.
Granting user rights to clear multiple receiver account events.
Setting up filters to determine which events are displayed, printed, or saved.
Switching the system to local mode of operation.
Modifying the interval for trouble signal re-sounding.
Configuring how System Control handles Security events.
Customizing the color for Emergency events display.
Customizing the color for Supervisory events display.
Customizing the color for Building events display.
Customizing the color for Trouble events display.
Customizing the color for Monitor events display.
Discusses issues with communication between control panels and workstations.
Troubleshooting workstation communication issues.
Troubleshooting communication with EST3/EST3X panels.
Addresses issues related to workstation hard drive failure and RAID.
Instructions for cleaning the air filter of the FW-UL6W.
Guidance on how to clean the workstation monitors.
Details the process for calculating UPS requirements.
Outlines the requirements for UL and ULC listings.
Details the requirements for FM approval.
How FireWorks communicates with panels over Ethernet.
Using redundant serial connections for communication.
Using two serial ports for redundant communication.
Using two TCP/IP ports for redundant Ethernet communication.
How FireWorks passes commands between control panels.
UL/ULC listed security applications for EST3 systems.
UL listed fire applications for all systems.
Configuring FW-UL6W as a Firefighter Smoke Control Station.
Configuring FW-UL6W as a Building System Information Unit.
Introduces Lantronix CPR Manager for serial device communication.
Step-by-step guide for installing Lantronix CPR Manager.
Process for creating a virtual COM port using Lantronix CPR Manager.
How to configure FW COM port with Lantronix CPR Manager.
Verifying the connection of the configured COM port.
To Next Page
General