Page 1 of 4 DATA SHEET E85010-0155
Not to be used for installation purposes. Issue 1.1
EDWARDS
®
Catalog u EST3 Mass Notification
03-26-20
LIFE SAFETY
&
INCIDENT MANAGEMENT
Overview
The MN-COM1S is a TCP/IP to RS-232 interface with one RJ-45
port and one RS-232 port. It is used in mass notification settings
to connect a FireWorks workstation to an EST3 control panel.
The MN-COM1S mounts on an MN-BRKT1F or an MN-BRKT3F
bracket. These install inside the EST3 control panel or Auxiliary
Power Supply for a neat and self-contained mass notification
solution.
Standard Features
• Connect a FireWorks workstation to an EST3 control panel.
• RS-232 Serial port for connection to 3-CPU3
• One RJ-45 port
• One RS-232 port
• Browser-based setup and configuration
TCP/IP to
RS-232 interface
MN-COM1S
7165-1657:
0186/0306
S3000
To Next Page
General