Let’s get your device connected
Thank you for choosing 4GEE WiFi
Here’s a quick guide to get you up and running
and making the most of your new device straight
away.
If you’re a devil for the detail, then visit ee.co.uk/
help/phones-and-device where you will find more
information about your 4GEE WiFi.
1. Lift the flap and insert the Nano-SIM into the
slot with the gold contacts facing upwards.
For more help setting up,
visit http://ee.co.uk/simstart
2. Connect the reversible USB cable to charge
your 4GEE WiFi. Use of a 9V/1.67A or 9V/2A
charger is recommended.
4GEE WiFi supports Qualcomm Quick Charge
2.0. Using a compatible charger can halve the
time to power your unit.
Getting to know your 4GEE WiFi
3. Once charged, you’re ready to go. Press down
on the power button for a few seconds and
your 4GEE WiFi will turn on.
1$12
Charging up other devices
Use the full-size USB to power up other devices
like tablets and smartphones.
ON/OFF&
Battery level
Signal
strength
SMS
Network type
4G / 3G
Micro USB
USB
Battery level is shown on the button.
Note: Your 4GEE WiFi needs at least 25%
battery to charge smaller devices (like a
smartphone) and at least 50% to charge
larger devices like tablets.
0-25% 26-50% 51-75% 76-100%
0-25%
Note: EE logo will illuminate when the device
is powered on.
To Next Page
Need help?
General
