CHARGER AND BATTERY INFORMATION
• Charge the battery in a well-ventilated environment. First, insert the
charging plug into the charging socket beneath the frame, then
connect the adapter to the power source.
• On average, it takes between 4 – 6 hours to fully charge the battery.
When fully charged, the LED indicator on the adapter will turn from
Yellow to Green. DO NOT charge the battery for more than 6 hours.
• After charging, disconnect the adapter from the power source first,
then remove the charging plug from the bike. Do not leave the adapter
plugged into the power source when not in use.
BATTERY CARE
• Do not over charge or fully drain the battery.
• Do not cover the charger or battery with anything when charging –
doing so would create a risk of overheating and fire.
• Only use the charger supplied in the original packaging. The usage on
an unapproved charger will void the warranty.
• You don’t need to fully drain the battery before recharging it.
Leaving a fully drained battery for a prolonged time will have a
permanent, negative impact on battery life. Proper charging of
the battery can maintain the battery capacity to a level of 85% after
5000 cycles. But due to the characteristics of the li-ion batteries, a
decrease of the total capacity over the course of time in inevitable.
• Keep the battery away from direct exposure to the sun. If not using
the bike for a long time, charge it at least once every 30 days.
• Do not short circuit the battery or it will create a risk of fire and will
void the warranty.
• Always dispose of the battery according to local laws and regulations.
• Please contact our customer service team if you have any questions
regarding the battery.
To Next Page
Loading...