Efco BCH 400 - Page 43

37
GB
WARNING!!!
Using an incorrect cutting attachment increases the risk of accidents! Only use the
recommended cutting attachments and guards and follow the manufacturer’s sharpening
instructions.
Ø mm
Recommended cutting attachments
Model Cutting attachments Guards
*
* Protection p. (C, Fig. 4) not needed. Metal cutting attachments.
BCH 400 S - BCH 400 T
DSH 4000 S - DSH 4000 T
130
130
P.N. 61459100
P.N. 61459101
P.N. 61450295AR
BCH 400 S - BCH 400 T
DSH 4000 S - DSH 4000 T
130
130
P.N. 61459102
P.N. 61459103
P.N. 61450295AR
BCH 400 - DSH 4000
BCH 400 - DSH 4000
255
305
P.N. 4095567AR
P.N. 4095675AR
P.N. 61450295AR
BCH 400 - DSH 4000
BCH 400 - DSH 4000
230
255
P.N. 4095637AR
P.N. 4095638AR
P.N. 61450295AR
*
BCH 400 - DSH 4000
BCH 400 - DSH 4000
230
255
P.N. 4095568AR
P.N. 4095563AR
P.N. 61450295AR
*
BCH 400 - DSH 4000
255
305
P.N. 4095641BR
P.N. 4095665BR
P.N. 61450295AR
*
BCH 400 - DSH 4000
BCH 400 - DSH 4000
255
305
P.N. 4095673BR
P.N. 4095674AR
P.N. 61450295AR
*