Efco H Series - Page 43

37
GB
WARNING!!!
Using an incorrect cutting attachment increases the risk of accidents! Only use the
recommended cutting attachments and guards and follow the manufacturer’s sharpening
instructions.
Model Cutting attachments Guards
* Protection p. (C, Fig. 4) not needed. Metal cutting attachments.
Ø mm
*
BCH 250 S - BCH 250 T
DSH 2500 S - DSH 2500 T
110
110
P.N. 61469100
P.N. 61469101
P.N. 61450295AR
200 P.N. 4095681BR P.N. 61450295AR
230
255
P.N. 4095637AR
P.N. 4095638AR
P.N. 61450295AR
*
230
255
P.N. 4095568AR
P.N. 4095563AR
P.N. 61450295AR
*
BCH 250 - DSH 2500
230 P.N. 4095565AR
P.N. 61450295AR
*
255
305
P.N. 4095673BR
P.N. 4095674AR
P.N. 61450295AR
*
Recommended cutting attachments