395823110a 4
PRODUCT SPECIFICATIONS
Stanford 80 & Harmony I Stanford 140 & Harmony III
Flue collar size: 6” Flue collar size: 6”
Flue position: top Flue position: top
Max. burn rate: 87,000 BTU/hr Max burn rate: 96,600 BTU/hr
EPA Output range: EPA Output range:
11,500–55,000 BTU/hr 12,000–60,900 BTU/hr
Particulate emissions: 4.42 g/hr Particulate emissions: 2.72 g/hr
Heating capacity: 1300-1800 sq ft Heating capacity: 1800-2500 sq ft
Max. burn time: up to 8 hours Max. burn time: up to10 hours
Max. log length: 18” Max log length: 22”
Loading: front and side Loading: front and side
Weight: 303 lbs. Weight: 386 lbs.
Testing / Listing
Your Efel wood stove has been tested to UL Standard 1482 by OMNI-Test
Laboratories, Inc., Beaverton, Oregon.
EPA Certification
The Efel wood stoves have been tested to rigorous emissions standards,
and have been certified by the Environmental Protection Agency.
WARNING:
• DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING
ANOTHER APPLIANCE.
• UNIT MUST BE INSTALLED ACCORDING TO ALL LOCAL CODES.
A BUILDING PERMIT MUST BE OBTAINED BEFORE INSTALLING.
• SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• DO NOT INSTALL IN A MOBILE HOME.
• READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE
INSTALLATION.
• UNIT MUST BE PROPERLY INSTALLED OR LISTING WILL BE
VOID.
• INSTALLATIONS OTHER THAN THOSE SPECIFICALLY COVERED
HEREIN HAVE NOT BEEN CONFIRMED BY TEST AND ARE NOT
COVERED BY THE LISTING.
To Next Page
Loading...
