EasyManua.ls Logo

Effekta ES4200 - General Symbols Explained

Effekta ES4200
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Photovoltaic Solar Inverter Series ES
Introduction
ES series
9
1.4.4 General symbols
This dot marks descriptions of activities that you should carry out.
This dash marks specifications.
This arrow marks a cross reference.
If a cross reference to another chapter is necessary in the text, this is
shortened for clarity.
Example: OM, 2 Safety Instructions
This means: See Operating Manual, Chapter 2 Safety
Instructions.
If the cross reference refers to a page, figure or position number, this
information is added at the end of the cross reference.
Example: Fig. 4 - 4, Pos. 1
This means: See position number 1 in figure 4 in Chapter 4
of this manual.
(3)
Numbers in brackets refer to the positions in the figures.
Identifies instructions for recycling.
Identifies components that are subject to the Electronic Scrap Regulation.
Identifies components or parts that must be disposed of. Do not throw these
in the household waste.
Requirement that must be fulfilled:
The DC circuit breaker is on "OFF."

Related product manuals