Pagina 3 di 28
If any abnormality in the oven's operation is noticed, contact Effeuno technical support exclusively
(service@effeuno.biz).
The oven is intended solely for the purpose for which it was designed; any other use is improper and
therefore dangerous. The manufacturer cannot be held responsible for any damages resulting from
improper, incorrect, or unreasonable usage. The oven is intended solely for professional use.
THE OVEN IS NOT BUILT-IN OR STACKABLE, NOT EVEN PARTIALLY
3. BEFORE USING THE OVEN
Remove the packaging and check the
appliance's integrity. For the initial baking
sessions, we kindly request that you retain
the original packaging. In case of
malfunction, it can be used to send the oven
back to us, enabling us to perform necessary
repairs.
In the positioning, strictly adhere to the
distances shown in the image on the right.
Before connecting the oven, ensure that the power cord is intact and that the nameplate data corresponds to
that of the electrical network; inadequate voltage can cause damage to the oven. If you are using a power
outlet near the oven, the cables of other devices must be kept a sufficient distance from the oven's hot parts.
During cooking, oven components heat up and remain hot for a limited period even after turning it off; do not
touch. The use of adapters, multiple sockets, and extensions is not recommended. If used, ensure that the devices
comply with current safety standards and do not exceed the current load limit marked on the adapter/extension.
If you notice any anomaly in the operation of the oven, contact exclusively Effeuno's technical service department.
To Next Page
Loading...
